Stitch and Glue boats ... anyone can build!

AndersBoats

Whats included - One serial number and emailed PDF file.  Each boat made must purchase a serial number.  You will receive a PDF file with in 24 hours of your purchase.  This file may be printed as often as you like, but each boat will need a separate serial number.  The PDF file can be printed on normal 8.5 x 11 paper, the simple lofting process is explained.  


How much will it cost to build a Boat, and how long will it take?  The average cost will vary on supplies, well below $15,000 was our design goal. Use the Bill of Materials below to estimate your cost. Time is estimated at 400 labor hours.  

EXTERIOR GRADE OR MARINE GRADE PLYWOOD               RESIN & GLASS (for coatings and reinforced areas)
4'x8'x1/4" - 9                                                                             Epoxy resin (#105) 14 Gallons, & Slow Hardener (#206) - 4 Gallons 
4'x8'x1/2" - 12                                                                           Biaxial Fiberglass ( 50" wide x 40 yards (4-20 yard rolls)​
STRONG BACK(can be made with any materials as needed)             70oz  #406 Colloidal Silica   

estimated  12qty  2"x4"x8'                                                        70oz #405 Filleting Blend Filler

Wheels if needed to move                                                        RECOMMENDED  HP - 70-100hp with remote controls, and       Should be built as needed to level building site                        power trim. Must be 20" for transom design. 


The PDF file can be printed on normal 8.5 x 11 paper, the simple lofting process is explained.  


How much will it cost to build a Boat, and how long will it take?  The average cost will vary on supplies, well below $10,000 was our design goal. Use the Bill of Materials below to estimate your cost. Time is estimated at 400 labor hours.  

EXTERIOR GRADE OR MARINE GRADE PLYWOOD               RESIN & GLASS (for coatings and reinforced areas)
4'x8'x1/4" - 5                                                                             Epoxy resin (#105) 7 Gallons, & Slow Hardener (#206) - 2 Gallons 
4'x8'x1/2" - 4                                                                             Biaxial Fiberglass 50" wide x 40 yards (2-20 yard rolls)​
STRONG BACK(can be made with any materials as needed)             35oz  #406 Colloidal Silica   

estimated  12qty  2"x4"x8'                                                        35oz #405 Filleting Blend Filler

Wheels if needed to move                                                        RECOMMENDED  HP - 15-20hp with remote controls, and       Should be built as needed to level building site                        power trim. Must be 20" for transom design. 

The "Black Pearl"

This 16' Deep Vee speed boat is made to blow your hair back in a all kinds of sea conditions with comfort. 

The "Baby Pearl" 

This R/C plan is a simple pattern for builders to try the Stitch & Glue building method. 

The "Blue Pearl"

This 11' Deep Vee speed boat is made to blow your hair back in a all kinds of sea conditions with comfort.